This product does not contain toxic and harmful substances, has no pollution to the environment, and has good bonding
ability to most building materials such as stone, concrete, cement, and aluminum. It can be widely used in indoor caulking and
sealing of various buildings in residential industrialization, and building materials. Bonding and other fields. It has low
modulus, good flexibility and good permanent deformation characteristics, and can well adapt to the displacement of cement concrete
joints.

Sealant for building doors and windows Slande
Features and Benefits
◎Environmentally friendly: low VOC, non-toxic, odorless, no pollution to the base material, no corrosion;
◇The surface can be painted: after the surface is dry, the surface can be sprayed with paint for coloring;
◇Good operability: single component, easy to operate, just extrude it with a glue gun and press
it for construction;
◇Excellent adhesion: Excellent adhesion to most building materials such as stone,
concrete, and aluminum;
With a displacement capacity of 20LM-R, it can well adapt to the joints of cement concrete. This
product can maintain its performance unchanged despite the normal expansion, contraction and shear
deformation of joints inside the building, and plays an effective sealing and bonding role.
composition
◇Single-component, neutral, room temperature water vapor curing silicone modified polyether sealant.
application
◇Caulk and seal the interior door frames, window sills, interior walls and other parts of the building;
◇Sealing of other parts suitable for use of this product in the construction field.
Main Specifications
Test items
skills requirement
When not cured, test at temperature (23±2)℃ and relative humidity (50±5)%.
Droop,mm
Extrudability,ml/min
Working hours,min

Surface drying time, h
Construction temperature range,℃

Cured at temperature (23-2)℃, relative humidity (50+5)%, tested for 28 days
Fixed elongation adhesion after water immersion
Adhesion after cold drawing-hot pressing
Modulus at 60% elongation, MPa
Elongation at break: %
Tensile strength, MPa
Fixed elongation and permanent deformation, %
No damage
No damage
Test results
Guideline

No damage

No damage

color
In
addition to black, white and gray, we can also negotiate and produce special colors according to customer requirements.
Adopt standards
MF1601 prefabricated building silicon modified polyether sealant meets or even exceeds the following
Standard specifications:

Application method
● Before using this product, operators must read the product safety information carefully.

The construction surface must be clean, dry, free of dust, water stains, frost,
Dirt, residual sealant, etc.
● Paste protective tape on both sides of the construction surface, and the caulker should use appropriate backing material
fee.
Cut the tip according to the required size, and squeeze it into and fill the interface continuously.
The amount of glue applied should be enough to fully contact the bonding sealing surface.