Main Specifications
S
Sealant for building doors and windows Slande
Test items
skills requirement
When not cured, test at a temperature of (23+2)℃ and a relative humidity of (50±5)%.
Test results
Guideline
Exterior
Density:g/cm³
Bonding strength,MPa
Translucent homogeneous material, self-leveling
1.05±0.05
≥0.3
Translucent homogeneous paste, self-leveling
1.05

0.45
GB/T31541
Surface drying time, h
1-3

Tensile strength,MPa
≥1
1.2
GB/T528
Elongation at break,%
≥200

GB/T528
Minimum operating temperature,℃
+10
+10
Adoption standards:
JC/T2560-2020 "Corner structural sealant for building doors and windows";
Q/ZZY 037-2022 "Polyurethane corner glue for building doors, windows and curtain walls".
Instructions
Remove dirt, dust, oil, frost, etc. from the surface of the substrate; place the glue nozzle on the open bottle mouth and tighten it, then use a glue gun to apply it.
Precautions
● Avoid contact with skin and eyes. If inadvertent contact, rinse immediately with plenty of water and see a doctor if necessary; avoid contact with children; do not contaminate food, drugs or
cosmetics.
● Recommended usage conditions: temperature 15~35℃, relative humidity 40%~80%; if the temperature and humidity are lower than the recommended lower limit, the product will cure slowly; if it is higher than the recommended upper limit, the construction
time will be shortened.
Package
Plastic tube packaging: 300mL each
storage
Can be stored for 6 months in a cool, ventilated and dry place
transportation
This product is non-dangerous and can be transported by train, car, ship and airplane